Tires

The e-bike version of the new Vittoria Mazza raises the bar on e-Enduro performance for mixed terrain! Starting with a defined center tread, the e-Mazza uses deep siping in the direction of rotation, allowing the tire to roll fast while still opposing drift. The stepped leading edge rolls like a ramp but digs in on climbs, making e-Mazza a top choice for both front and rear use. Substantial spacing was designed into the center tread to provide braking traction while also accelerating mud clearing. Cornering on the e-Mazza is handled by Vittoria's trademark progressive sipe width technology, which gives a gummy inside effective edge without the instability that competitors experience on the outside of the tread. The tire's generous tread depth claws into a range of terrain and is stabilized with Vittoria's proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered, allowing the surface of the tread to remain tacky while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance and increased wear life. - Aggressive profile with ample sipe spacing for mixed terrain - Progressive sipe-width pattern provides tactile grip at the knob surface without sacrificing speed or grip - Graphene 2.0 compound reduces rolling resistance, increasing range and battery life

The Vittoria Agarro trail tire, Enduro inspired performance meets XC efficiency for your Trail bike. The Agarro trail tire is deigned to take you there and back, with a tread profile that gives considerably more grip than an XC tire, but with less bulk than an Enduro tread. - Leading edge steps for fast rolling (like a ramp), but better climbing in technical terrain at slow speeds - E-bike compatible tread profile is then wrapped on Vittoria’s tubeless-ready Trail casing, complete with APF inserts and sidewall protection, for added stability and protection

Martello hammers home the performance you expect, on the most demanding Enduro and DH courses. Looking for the one tire to tackle a wide range of courses? The Martello features a World Championship proven TNT bead, add the proprietary 4C Graphene compound, topped off with a moto-inspired tread design and progressive width siping. This last part is key, and provides for a progressive feel on the effective edge, allowing for that fine-touch tactile feel that top racers expect. This design provides for a progressive feel on the effective edge, allowing for that fine-touch tactile feel that riders expect. Whether shredding rocks, roots, or mixed terrain, Martello delivers.

The muddiest DH course conditions possible have inspired the Mota DH tire. Intended for use on professionally maintained courses, the moto block spikes cut into soft terrain, providing world class grip across the most slick surfaces. The Mota tread features the same progressive width design as the Martello, which provides for a progressive fine-touch tactile feel on the effective edge. When the course demands the most aggressive tires possible, the Mota is your answer. - For the muddiest Enduro courses - With enough room, muck and debris can be shed right away - Available with TNT bead technology, a proven winner in world championships - While maintaining speed and grip, the progressive sipe-width pattern on the knob surface gives tactile grip

Enduro inspired performance meets XC efficiency – for your e-bike! By borrowing the best traits from the popular Martello, Barzo, and Gato models, the e-Agarro utilizes proven technologies from both the Enduro and XC categories. This combination of performance is ideal for the Trail category, as it provides predictable grip and efficiency in a mix of conditions.

e-Martello hammers home the performance you expect, while extending your ride. Looking for the one tire to tackle a wide range of courses? This is the ticket. e-Martello features a 4C Graphene compound combined with a moto-inspired tread design and progressive width siping. This design provides for a progressive feel on the effective edge, allowing for that fine-touch tactile feel that riders expect. Whether shredding rocks, roots, or mixed terrain, e-Martello delivers.

The Martello Race tire has been developed to provide the best combination of riding feeling and performance for technical trails at maximum speed. The design provides performance you expect on the most demanding and wide range of Enduro and DH courses. Start with a World Championship proven TNT bead, add the proprietary 4C Graphene compound, and top it off with a moto-inspired tread design with progressive width siping. - Progressive feel on the effective edge, allowing for that fine-touch tactile feel that top racers expect - The insert below the tread provides additional puncture protection - Progressive sipe-width pattern provides tactile grip at the knob surface, without sacrificing speed or grip - Moto-block square knobs offers stability and durability - Whether shredding rocks, roots, or mixed terrain, Martello delivers

The Mazza Race has been developed to provide the best combination of riding feeling and performance for technical trails at maximum speed. Deep siping allows the tire to roll fast while still opposing drift, especially in off-camber terrain. The stepped leading edge rolls like a ramp, but digs in on climbs, making Mazza a top choice for both front and rear use. - Generous tread depth claws into a range of terrain, and is stabilized with Vittoria’s proprietary 4C compound layering process, allowing the surface of the tread to remain tacky, while the base remains planted - Wach effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance, and increased wear life - Substantial room was designed into the center tread to provide braking traction, while also accelerating cleaning - Cornering is handled by Vittoria’s trademark progressive sipe width technology, which gives a gummy inside effective edge, without instability - New Enduro Race Casing with insert below the tread provides additional puncture protection

This race-day-specific weapon has raised the bar on tire technology. The Corsa Speed uses a proprietary Graphene compound, which is then paired with an ultra-fine Corespun-T casing. The end result is a tire that maintains the lowest rolling resistance, while still providing the trademark Corsa suppleness and outstanding wet weather grip - 320 TPI Corespun cotton casing - Proprietary Graphene compound - Lightweight, flexible latex inner tube

The Adventure Tech offers a fast-rolling center that transitions to a mild side tread for City/Touring performance in a range of conditions. The e-bike-compliant Graphene compound rolls fast and extends battery life when used on an e-bike. A reflective sidewall stripe increases your visibility for oncoming motorists, while the Solid Shielding puncture protection layer makes punctures a thing of the past. As with all Vittoria Tech Series tires, the mix of performance and durability add up to a great value! - Fast-rolling center, transitioning to a mild side tread - Graphene compound is Regulation-compliant for e-bike use - Wire bead

Unstoppable on ups. Relentless on descents Syerra has been developed to satisfy the needs of the emerging Down Country segment, raising the limit of what a XC tire can do. Vittoria engineers combined in a single product Speed and Rolling Performance – typical features of the XC segment – together with High Grip and Resistance – traits of the Trail Segment. The result is a light and fast product which allow to have fun also when tackling burlier descents and gnarlier terrain. - High durability and maximum speed thanks to Graphene and 4 different kind of compounds - Outstanding grip performance: tread design engineered for multiple conditions - Safety and sidewall protection ensured by the Anti-Pinch Flat (APF) sidewall insert

The Speedster is a high performance race and dirt jump tire designed for speed and minimal drag on hard packed or paved terrain in wet or dry conditions. - Honeycomb center tread provides added traction and increased speed with very low rolling resistance; large diamond shaped side knobs give extra grip and cornering control - Large diamond shaped side knobs give extra grip and cornering control - Low Specific Gravity Compound is lightweight and designed for high speed

Born in BMX racing competition, Speed Booster is designed to meet the demands of lighter weight, better stability when cornering, good rolling resistance at high speed and grippy contact to the track, thanks to new developed LSG+ compound that is used exclusively for the Speed Booster. - Folding bead BMX race tire - LSG+ compound: Based on Vee's roadbike compound with 66 hardness now applied for BMX racing with great rolling resistance for hard pack circuit but at the same time holds grip from start, with fast cornering

Growth and mature in gravity segment that demands tires have great performance for varieties of terrain from mud, dry or loose soil. Flow Snap is expanded into Plus Size with more air volume for more fun in trail.

Growth and mature in gravity segment that demands tires have great performance for varieties of terrain from mud, dry or loose soil. Flow Snap is expanded into Plus Size with more air volume for more fun in trail.

Growth and mature in gravity segment that demands tires have great performance for varieties of terrain from mud, dry or loose soil. Flow Snap is expanded into Plus Size with more air volume for more fun in trail.

Front and rear BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness

OS20 diameter BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. - CYLEX 120 TPI superlight casing - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness - OS20 utilizes a larger diameter tire design to increase rolling efficiency Compatibility: - Must use with specific OS20 frames and rims, however many forks will accept this tire sizing currently - ISO Diameter = 451mm - NOT compatible with standard 20-inch BMX rims (ISO Diameter = 406mm)

Sharing same state-of-the-art features as the FASTR, the FASTR REACT adds distinctive rows of paddle-like serrated shoulder treads designed to better “lockdown” the tire during hard acceleration to more efficiently transfer the power of each pedal stroke into forward momentum. React faster out of the gate with the FASTR REACT. - CYLEX 120 TPI Ultralight casing - UTC Rubber Compound - Folding Bead

A highly versatile front and rear race tire option that strikes a balance between speed and control with Tioga's GripPod technology and Nano Knob tread design. - CYLEX 120 TPI ultralight casing - UTC rubber compound - Grip-Pod system helps maintain traction when cornering - Chemical etching on center tread creates a fine texture for enhanced traction - Multi-facet nano knobs provide additional traction on tire shoulders - ISO diameter: 406mm

With the increased strategical placement of Grip-Pods matched to multi-facet Nano Knobs on shoulder and sides, capped off with friction-enhancing chemical etching over the central tread, FASTR-X strikes the rarefied balance of speed and control like none before. - CYLEX 120 TPI ultralight casing - UTC rubber compound - Grip-Pod system helps maintain traction when cornering - Chemical etching on center tread creates a fine texture for enhanced traction - Multi-facet nano knobs provide additional traction on tire shoulders - ISO diameter: 451mm

Front and rear folding bead BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. The S-Spec version utilizes Tioga's thinnest sidewall for maximum suppleness and weight savings. - CYLEX 120 TPI superlight casing - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness - ISO diameter: 406mm

A highly technological BMX race tire that utilizes multiple grip surface sections designed to help riders increase rolling efficiency, acceleration, cornering grip and control. - CYLEX 120 TPI ultralight casing - UTC rubber compound - Serrated tread design increases grip during hard acceleration - Grip-Pod system helps maintain traction when cornering - Ultra-low profile tread is designed to minimize rolling resistance - PneuMax 110 PSI high-pressure coating

A highly versatile front and rear race tire option that strikes a balance between speed and control with Tioga's GripPod technology and Nano Knob tread design - CYLEX 120 TPI ultralight casing - PneuMax 110 PSI high-pressure inner coating - AvntGUARD cut protection membrane - UTC rubber compound - Grip-Pod system helps maintain traction when cornering - Chemical etching on center tread creates a fine texture for enhanced traction

GRAVEL Sometimes the greatest journeys are full of memorable experiences: churning over towering mountain passes, trying to make it to the next town before the café closes, pedaling from sunrise to sunset, or sleeping in when you’re gifted with perfect weather and an incredible view from your tent. We designed the Sparwood around long-distance mixed-terrain routes, for riders seeking to experience the land, not just ride on it. HOW IT WORKS - Center lugs are raised and ramped for rolling efficiency; the diamond-shaped lugs squeeze in for grip as they contact dirt, then back out to shed debris. - Diamond- and chevron-shaped transition lugs feature staggered spacing and height to improve shedding and traction. - L-shaped side lugs dig in for grip while braking through corners, but roll quickly when off the brakes.

GRAVEL Whether your route covers rough roads or fast gravel, or even both in the same day, Washburn is built for the job. Its center slick provides awesome rolling efficiency on pavement and packed dirt, while the shoulder lugs take over in the turns, digging in for confidence in loose corners. HOW IT WORKS - Center tread is smooth to minimize rolling resistance and maximize speed. - Transition lugs are tightly spaced to provide progressive initial cornering traction. - Side lugs are spaced out to dig in while cornering and when riding over loose surfaces.

GRAVEL Designed with the unknown in mind, the Rutland takes the guess work out of selecting the right tire for the ride. Ramped, tightly spaced center lugs reduce rolling resistance while larger, more spaced-out shoulder and transition lugs provide grip in loose conditions. HOW IT WORKS - Center lugs are large and widely spaced for braking and acceleration grip, and ramped to lower rolling resistance. - Transition lugs are spaced out to shed mud; siping conforms to the road surface for increased traction in corners. - Side lugs are staggered to provide traction in more aggressive turns and on loose surfaces.

GRAVEL Cannonball is a go-to gravel race tire for normal conditions. The tread pattern features a directional, tight-knit center tread that sheds dirt and debris to decrease rolling resistance, and side knobs for effective cornering traction. Cannonball is built for all-around gravel riders and racers. HOW IT WORKS - Center lugs are raised and ramped for rolling efficiency; the diamond-shaped lugs squeeze in for grip as they contact dirt, then back out to shed debris. - Transitions lugs are spaced out and vary in height to boost traction. - L-shaped side lugs dig in for grip while braking through corners, but roll quickly when off the brakes.

ALL-ROAD From minimum maintenance to decaying pavement, rolling hills to near vertical climbs, Rampart was made for riders who want the freedom to pick their own path no matter what the road looks like. These tires were designed and inspired by our experiences riding and racing courses with varying conditions. HOW IT WORKS - Center tread is smooth and fast-rolling for straight-line speed; thicker center tread and durable casing lasts longer even on harsh surfaces. - Transition and side lugs consist of 3-2-1 siping for traction on all road surfaces.

OFF-ROAD Ehline is an ideal tire for modern XC trails: fast-rolling without compromising cornering performance. Ehline’s tread pattern and casing provide more traction and durability than traditional XC tires, making it a great choice for riders who take on increasingly aggressive and challenging terrain. HOW IT WORKS - Center lugs are short, tightly-spaced, and ramped to roll quickly; perpendicular siping provides grip during both braking and acceleration. - Transition lugs are ramped to roll quickly and spaced out to shed mud; horseshoe-shaped siping allows lugs to conform to the terrain to maintain traction during braking. - Side lugs are taller and staggered, with parallel siping to enhance grip while leaning into a turn.