Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Cables

$10.99
Get your cables under control. - Trek cable stops and guides - For specific compatibility concerns, please contact our Customer Service team
$5.49
- Shimano, Y8JA98020, SM-BH90, Olive and connecting insert
$24.99 - $28.99
Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.
$21.99
Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
$12.99
Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
$29.99
Keep your brake housing ends tidy with Jagwire's Open End Caps.
$34.99 - $69.99
Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.
$11.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - Double-ended SRAM/Shimano mountain and road compatible cable ends - Stainless steel construction resists corrosion - Double Ended: Yes - Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain - Defined Color: Silver - Quantity Included: 1
$5.49 - $11.99
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.
$5.99
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.
$9.98 - $18.85
Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.
$5.99
- Vision Aero/reverse brake lever specific brake cable - Replacement cables that only work with Vision reverse brake levers - Sold individually
$169.99
Hydraulic hose with banjo fitting for TRP brakes.
$32.99
Hydraulic hose with banjo fitting for TRP brakes.
$102.00
Shimano, SP41, 4mm Shifter housing, 50m
$33.99
- Disc brake hose for all hydraulic Shimano disc brakes with straight connection type. Length 2000mm, outer diameter approx. 5mm. - Compatible brake levers: BL-T615, ST-M4050, BL-M506, BL-M505, BL-M445, BL-M396, BL-M395, BL-M355 - Compatible brake caliper: BR-T615, BR-M4050, BR-M447, BR-M446, BR-M395, BR-M355 - Also compatible ST-RS785 and ST-RS685 road hydraulic levers with BR-RS785 or BR-RS805 calipers - Straight connection at lever and caliper
$42.00
Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation. - Dura-Ace grade SLR-EV Road brake cable set - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance - Pre-lubed with special polymer compatible grease
$10.00
Shimano Stainless Derailleur Cables Cable Head: Shimano/SRAM Cable Type: Stainless Defined Color: Gray Diameter: 1.2mm Double Ended: No Length: 3000 mm Quantity Included: 1
$27.00
- 1.2 mm x 2100 mm (1 pc.) - 1.2 mm x 1800 mm (1 pc.) - OPTISLICK - Stainless steel - Outer cap with short tongue for ST (2 pcs.) - SIS-SP40 outer caps (3 pcs.) - SIS-SP40 sealed outer caps (1 pc.) - Inner end caps (2 pcs.) - OT-SP41 1700 mm - OT-RS900 (1 pc.)
$9.00
- Wet or muddy condition cable sealing solution - 4/6mm
$89.90 - $99.90
- Brake casing has internal lining and external plastic coating - Derailleur casing is compressionless with internal lining and external plastic coating
$43.90 - $49.90
- Brake casing has internal lining and external plastic coating - Length: 30m
$29.90
- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut
$8.00
SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other, and making rattling noises, and they provide a tidy custom look, too.
$22.00
- Complete ferrule and cable end kit - Includes: Shift 4.0mm (Qty10), Brake 5.0mm (Qty 6), Cable Tip (Qty 4) - Material: Aluminum
$46.00 - $46.99
SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes. - Compatible with SRAM Guide R, RS, RSC, and DB5 brakes - Length: 2000mm
$18.00
SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.
$18.00
SRAM's Inline Barrel Adjusters are placed on your brake cables near the handlebars so that you can turn the adjusters to fine-tune your braking. They feature durable and light aluminum/composite construction with rubber covers for easy operation.
$9.00
SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.
$167.00
- Hydraulic Disc Brake Hose Fitting Kit - Includes 50 threaded hosebarbs, 50 red comp fittings, 1 T8 Torx - Compatible with Stealthamajig and standard levers
Page 1 of 4 Next page