Tires/Tubes

- Shim adds support to Presta stem used in a Schrader rim

Vittoria's Mastik'One is a professional-grade tubular cement that has been trusted by the pros for decades. It provides excellent hold on both aluminum and carbon rims, and gives you the piece of mind that comes with knowing you're riding on the best. - Choose from 250-gram tin or 30-gram 12-pack - 30 grams is enough for one to two tires depending on surface area

Quickly inflate your flat tire and seal the puncture with a can of Vittoria's Pit Stop Road Racing. It contains sealant and compressed air to repair and inflate a tubular (sew-up) or clincher tire in under a minute so you can get on with your ride.

Even lighter, even more compact, and ideal as a spare, the S-Tubo-MTB tubes were developed to have a minimum possible packaging size. With a removable valve stem, the tubes have a size of only Ø3.5cm x 5cm height when packaged. The puncture resistance is the same as with standard butyl rubber tubes but with a weight of only 45g (for 29"). - 42mm valve length

At a featherweight 23g, the super-compact (when rolled up) S-Tubo-Road tubes stand out with very low rolling resistance which outpaces standard rubber tubes. With a 78% smaller packed size and the same puncture resistance as standard tubes, the S-Tubo-Road is the perfect choice as a spare and can be the crucial factor when you’re riding long and hard. - Ready for disc brakes (not suitable for rim brakes)

For 29er tires, more than 100g per wheel can be saved with Tubo tubes compared to standard butyl tubes—and almost twice as much space when packaged. Their riding safety is twice as high as for standard tubes and offers maximum protection against a breakdown. The assembly is just as easy as standard tubes. Tubolito tubes are also a lightweight alternative to a tubeless setup. - 42mm valve length

- ISO Diameter: 406 / 20" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Shaft: Threaded - Valve Core: Removable

- Low Lead Valve - ISO Diameter: 540 / wheelchair - ISO Width (mm): 35mm - Labeled Size: 24 x 1-3/8 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 124g

- ISO Diameter: 622 / Road / 29" - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Shaft Type: Threaded - Valve Core: Removable

- Size: 700c x 28 – 32 - ISO Diameter: 622 / road / 29" - ISO Width: 28mm, 29mm, 30mm, 31mm, 32mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 128g (32mm), 129g (48 & 60mm)

The Next Level in Sealing Power from the People who Invented Tubeless Conversions If you've walked the mechanics' pits at any National or International level event, chances are you've seen them: trademark Stan's black quart bottles with no labels. Look closer and you might have seen strange symbols scrawled all over the bottles in a silver marker, letters and numbers, formula notes by the man himself, Stan Koziatek. For nearly fifteen years Stan has been quietly formulating a special racing version of our legendary sealant for many of cycling's most successful teams. Working with athletes who push themselves and their tubeless systems to the absolute limit, he developed a proprietary sealant formula with close to twice the amount of the standard sealing crystals plus special "XL" crystals capable of sealing even larger punctures. Stan's Race Sealant's combination of large and smaller sealing crystals interlock to form a lattice work that not only seals but strengthens and reinforces the area of the puncture, allowing for an entirely new level of sealing performance. The quantity and size of crystals in this special formula means that Stan's Race Sealant can only be installed directly into the tire. As a result of its immense sealing capabilities, the Race Sealant will clog injectors and smaller bottles almost immediately. Stan's has made Race Sealant available to riders everywhere, and it is only available by the quart. - First choice of riders around the world for tubeless conversion and flat prevention - Twice the amount of Stan's standard sealing crystals - "XL" crystals capable of sealing even larger punctures - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment

The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires

Specialized's Big Roller tire gives younger riders advantages that adult size bikes are getting. Wider tires, along with a new tread design allows for maximum traction and stability in many riding conditions. This leads to more fun and better confidence! - Casing: 60 TPI - Bead: Wire - Compound: 60a - 20 x 2.8"; Max Ride 20psi / Max Install 35psi; approximate weight 670g - 24 x 2.8"; Max Ride 25psi / Max Install 35psi; approximate weight 835g

The latest generation of the World-Cup-proven intermediate tire, the Butcher BLCK DMND 2Bliss Ready, receives sawtooth faces on the tread blocks to increase stability under load and to provide additional biting edges. This, in turn, improves rolling speed as well as control under hard braking and cornering. Meanwhile, our proprietary GRIPTON compound improves high-frequency damping, gripping the tire to the ground better on both small bumps and rough sections. The low frequencies of the rolling tire deflections pass through unfiltered, leaving no energy absorbed and keeping speed high. Once you ride the Butcher, you'll never want another tire for your gravity excursions. The new BLCK DMND casing strikes the balance between suppleness and extreme pinch flat protection. In order to descend all-out, you need as much traction as possible, the tire needs to conform and hold on to the ground, but also protect from pinch flats. In order for this to happen, only the treaded part of the tire needs to conform, grip, and dampen, while the tire base offers stability and support for steering inputs. - Folding bead - 2Bliss Ready - Compound: GRIPTON - Pressure: 20 – 40psi - Casing: Center Overlap, Flip Up, and Rubber Apex

The latest generation of the World-Cup-proven intermediate tire, the Butcher GRID 2Bliss Ready, receives sawtooth faces on the tread blocks to increase stability under load and provide additional biting edges. This in turn improves rolling speed as well as control under hard braking and cornering. Meanwhile, our proprietary GRIPTON compound improves high frequency damping, attaching the tire to the ground better on both small bumps and rough sections. The low frequencies of the rolling tire deflections pass through unfiltered, leaving no energy absorbed, keeping speed high. Once you ride this new Butcher, you will never want another tire for your gravity excursions. We recommend GRID tires for anyone seeking the utmost in flat and sidewall protection or additional stability. - Casing: 60 TPI - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON - 650b x 2.3", PSI 25-50, approximate weight 870g - 650b x 2.6", PSI 20-40, approximate weight 960g - 650b x 2.8", PSI 15-30, approximate weight 1060g

The latest generation of the World-Cup-proven intermediate tire, the Butcher GRID TRAIL 2Bliss Ready, receives an entirely new tread pattern. Wider shoulder knobs better support load under hard cornering, while the biting edges of the shoulder knobs are moved further inside. The center blocks have been staggered and spaced better for a smoother transition when leaning the bike over. Our new GRID TRAIL casing is stiffer, delivering better handling at lower pressures, all while increasing pinch flat protection by 15% and puncture protection by 30%. Meanwhile, our proprietary GRIPTON compound improves high-frequency damping, gripping the tire to the ground better on both small bumps and rough sections. The low frequencies of the rolling tire deflections pass through unfiltered, leaving no energy absorbed and keeping speed high. Once you ride the Butcher, you'll never want another tire for your gravity excursions. - Casing: Additional bead to bead protection for exceptional durability plus sidewall stiffness stability - Compound: GRIPTON - Pressure: 25 – 50psi - Folding bead - 2Bliss Ready

The Butcher GRID TRAIL 2Bliss Ready T9 features a World-Cup proven aggressive tread design to bite and grip in any condition. Ramped and siped, the center tread blocks provide maximum traction and accurate steering. The sawtooth faced shoulder knobs offer a continuous biting edge for railing through corners. Our GRID TRAIL casing is a step up from GRID with more reinforcement, delivering better handling at lower pressures—all while increasing pinch flat protection by 15% and puncture protection by 30%. The high-dampening GRIPTON® T9 compound rebounds slowly to grip and stick to the ground for total traction and control. - Casing: 60 TPI, tough trail construction with additional bead to bead protection for exceptional puncture resistance, sidewall stiffness and stability. - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON® T9

The latest generation of the World-Cup-proven intermediate tire, the Butcher GRID TRAIL 2Bliss Ready, receives an entirely new tread pattern. Wider shoulder knobs better support load under hard cornering, while the biting edges of the shoulder knobs are moved further inside, and the center blocks have been staggered and spaced better for a smoother transition when leaning the bike over. Meanwhile, our proprietary GRIPTON compound improves high-frequency damping, attaching the tire to the ground better on both small bumps and rough sections. The low frequencies of the rolling tire deflections pass through unfiltered, leaving no energy absorbed and keeping speed high. Once you ride the Butcher, you'll never want another tire for your gravity excursions. Our new GRID TRAIL casing is stiffer, delivering better handling at lower pressures—all while increasing pinch flat protection by 15% and puncture protection by 30%. It's the perfect choice for your gravity excursions—one ride and you'll be hooked. Building on this solid base, the high-dampening T9 Gripton compound rebounds slowly to grip and stick to the ground for total traction and control. - Casing: 60tpi light yet tough with additional bead to bead protection for exceptional durability, sidewall stiffness, and stability. - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T9 - 29 x 2.3", psi 25-50, approximate weight 975g - 29 x 2.6", psi 20-40, approximate weight 1050g

A proper choice for high-power e-bikes, the Electrak 2.0 Armadillo Reflect tire also performs amazingly with other bikes that can handle this tire size. The Armadillo construction provides maximum flat protection from bead to bead, while also supporting the entire casing to handle the rigors that these bikes dish out when roaming city streets. The next generation Electrak 2.0 tread has GRIPTON compound and grooves for ultimate grip and performance when the weather turns foul. It's also an excellent choice to install on 29-inch mountain bikes that get plenty of time on city streets and the open road. Lastly, its reflective accents will increase your visibility to motorists in low-light conditions. - Casing: 60 TPI - Bead: Wire - Compound: GRIPTON - Flat Protection: Armadillo - 700 x 51mm / 29 x 2.0"; PSI 40-65; approximate weight 945g

The Eliminator GRID TRAIL 2Bliss Ready tire features a new generation of tread that combines an aggressive block design with a well-balanced tread pattern. Its transition knobs help bridge the traditional channel between center and shoulder knobs, making the Eliminator perfect for enduro where versatility is key. The Eliminator still has the bite of a DH tire but also brings the manners to handle well on hardpacked trails. These characteristics also work well for trail e-bikes, too—combining the traction needed to stay in control on the trail with neutral handling on fire roads. Our new GRID TRAIL casing is stiffer, delivering better handling at lower pleasures—all while increasing pinch flat protection by 15% and puncture protection by 30%. - Casing: Additional bead-to-bead protection for exceptional durability, plus sidewall stiffness stability - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON - 29 x 2.30: PSI 25-50, approximate weight: 890g - 29 x 2.60: PSI 20-40, approximate weight: 930g

The Fast Trak Control 2Bliss Ready T5 has become synonymous with fast and lightweight tires that are able to handle the most technical courses and the most grueling conditions. This model redefines what was thought possible with a cross-country tread design. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support, and stable handling. Adding to this, the Fast Trak profile and knob spacing has been optimized for a wide variety of internal rim widths. The Control casing is our light and durable do it all XC construction. To top off this build we use our fastest rolling, race-ready T5 compound with excellent wear and tear protection. - Casing: 60 TPI, light and durable do it all XC construction. - Bead: Foldable. - Butyl wrapped bead = 2Bliss Ready. - Compound: GRIPTON® T5.

The Fast Trak Control 2Bliss Ready T5 has become synonymous with fast and lightweight tires that are able to handle the most technical courses and the most grueling conditions. This model redefines what was thought possible with a cross-country tread design. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. Adding to this, the Fast Trak profile and knob spacing has been optimized for a wide variety of internal rim widths. The Control casing is our light and durable do it all XC construction. To top off this build we use our fastest rolling, race-ready T5 compound with excellent wear and tear protection. - Casing: 60 TPI, light and durable do-it-all XC construction - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T5 - 29 x 2.20", PSI 25-50, approximate weight 625g - 29 x 2.35", PSI 25-50, approximate weight 670g

The Ground Control tire is such a great trail tire, we have adapted it for all sizes and ages. This tried-and-true design features CAD-engineered knob shapes, which strengthen the knob structure for optimal braking and traction, but it keeps the knob surfaces adaptable for the best possible grip on mountain trails. - Casing: 26 TPI - Bead: Wire - Compound: 60a - 20x2.35", 25~50 - 24x2.35", 25~50

The Pathfinder is an incredible all-around tire that was originally created to meet the demands of the modern adventure rider. It has become so popular and well-received that we knew we had to offer it to riders of all ages. The Pathfinder youth is a versatile wire-bead tire with grippy cornering knobs for any conditions. Its fast-rolling slick center will make any sized rider the leader of the family peloton. - Casing: 30 TPI - Bead: Wire - Compound: 70a - Flat Protection: Flak Jacket

The Ground Control Control 2Bliss Ready T5 uses an extremely versatile tread pattern which can be used from cross country race to trail, it rolls fast with exceptional amounts of confidence and grip. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. The Control casing is our light and durable do it all XC construction. To top off this build we use our fastest rolling, race-ready T5 compound with excellent wear and tear protection. - Casing: 60 TPI, light and durable do it all XC construction - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T5 - 27.5 x 2.35", PSI 25-50, approximate weight 720g

The Ground Control Control 2Bliss Ready T5 uses an extremely versatile tread pattern which can be used from cross country race to trail, it rolls fast with exceptional amounts of confidence and grip. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. The Control casing is our light and durable do it all XC construction. To top off this build we use our fastest rolling, race-ready T5 compound with excellent wear and tear protection. - Casing: 60 TPI, light and durable do it all XC construction - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T5 - 29 x 2.2", PSI 25-50, approximate weight 800g - 29 x 2.35", PSI 25-50, approximate weight 845g

Specialized's Ground Control GRID is an exceptionally versatile trail tire. CAD engineered knob shapes strengthen knob structure for optimum braking and traction, but keep knob surfaces adaptable for best ground control. The GRIPTON compound helps make this the perfect choice for epic trail rides in any condition. Specialized recommends GRID tires for anyone seeking the utmost in flat and sidewall protection. - Bead: Foldable - Butyl wrapped bead, 2Bliss Ready - Compound: GRIPTON - 29 x 2.1" psi 25-50; approximate weight 710g - 29 x 2.3" psi 25-50; approximate weight 810g

The Ground Control Grid 2Bliss Ready T7 uses an extremely versatile tread pattern which can be used from cross country race to trail, it rolls fast with exceptional amounts of confidence and grip. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. The GRID casing provides a light and supple trail construction with additional sidewall protection for durability and sidewall stability. To top off this build we use our T7 compound to maximize grip and damping. - 27.5 x 2.35", PSI 25-50, approximate weight 800g. - 27.5 x 2.6", PSI 25-50, approximate weight 850g. - 27.5 x 3.0", PSI 25-50, approximate weight 1050g. - 29 x 2.2", PSI 25-50, approximate weight 820g. - 29 x 2.35", PSI 25-50, approximate weight 845g. - Bead: Foldable. - Butyl wrapped bead = 2Bliss Ready. - Casing: 60 TPI, light and durable XC/Trail construction with additional sidewall protection and stability. - Compound: GRIPTON T7.

The Ground Control Sport uses an extremely versatile tread pattern which can be used from cross country race to trail, it rolls fast with exceptional amounts of confidence and grip. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. - Casing: 60 TPI - Bead: Wire - 29 x 2.35", PSI 25-50, approximate weight 890g

Specialized's Hardrock'R is a long-lasting tire with an aggressive, yet smooth-rolling tread with multi-directional knobs that are sure to improve traction and cornering over mixed terrain. And with the added benefit of its Flak Jacket flat protection, you'll be sure to hit it all with confidence and control. - Casing: 30 TPI - Bead: Wire - Compound: 70a - Flat Protection: Flak Jacket - 26 x 2.0"; psi 35-65; approximate weight 880g - 650b x 2.0"; psi 35-65; approximate weight 960g - 29 x 2.0"; psi 35-65; approximate weight 1000g