Tubes: All Sizes/Types

- 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 559 / 26" mtn - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 468g (1.5-1.75), 536g (1.9-2.125)

- Labeled Size: 26 x 4.0 – 4.8 - ISO Width: 100mm – 120mm - ISO Diameter: 559 / 26" MTN - Wall Thickness: 1mm - Valve length: 32mm - Shaft Type: Threaded - Valve Core: Removable - Weight: 580g

Smooth, supple, and feather-light Bontrager's Latex Tubes are an ideal solution for riders who prefer the convenience of clinchers yet seek the supple feel of a tubular. The latex material reduces rolling resistance while their elasticity improves resistance to punctures and pinch flats. Product details - Constructed of super-supple and lightweight latex - 0.7mm wall thickness - Equipped with removable valve cores - 100% inspected for guaranteed quality - Lowest rolling resistance - 48mm valve length

Your little ones have a youthful, intrepid spirit that sees them riding wherever the wind takes them. Most of the time, however, it takes them straight through thorns and debris, leaving you with the unenviable task of changing out flat after flat. But with our Standard Schrader Valve Youth Tubes, you'll have the peace of mind that they're riding on tough tubes that are built strong to last. And to make sure of it, they feature a molded method of construction that ensures a consistent thickness of butyl rubber, meaning that they'll roll smooth and stay tough, ride after ride. Individually cured for consistent tube thickness = the utmost in quality.

- Labeled Size: 26 x 3.5 – 4 - ISO Width: 88mm – 100mm - ISO Diameter: 559 / 26" MTN - Valve: Presta Short 32-40mm - Valve Core: Removable - Wall Thickness: 1mm - Weight: 500g

- ISO Diameter: 584 / 650b / 27.5" - ISO Width: 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm - Labeled Size: 27.5 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Schrader

This is Surly’s 29 x 3-inch Presta valve tube. It fits their Knard tires and is made of butyl rubber.

Surly Inner Tube to fit a wide range of plus-size and fat bike tires. - Labeled Size: 26 x 3.0 - 4.8 - Weight: 310 g - Valve Core: Removable - Shaft Type: Threaded - ISO Width (mm): 76mm–100mm - Tube Compound: Butyl - ISO Diameter: 559 / 26-inch MTN - Valve: Presta Short 32-40mm

An inner tube for fat bikes, built with the Hodag and Jackalope in mind. Fat tires need fat tubes. The Fat Bike Tube is just that, a tube built specifically for fat bikes. Tailored sizes perfectly suit the line of Bontrager fat tire models. Product details - 0.9mm wall thickness - Equipped with removable valve cores - 100% inspected for guaranteed quality

Your little ones have a youthful, intrepid spirit that sees them riding wherever the wind takes them. Most of the time, however, it takes them straight through thorns and debris, leaving you with the unenviable task of changing out flat after flat. But with our Standard Schrader Valve Youth Tubes, you'll have the peace of mind that they're riding on tough tubes that are built strong to last. And to make sure of it, they feature a molded method of construction that ensures a consistent thickness of butyl rubber— meaning that they'll roll smooth and stay tough, ride after ride. - Consistent thickness for the utmost in quality. - 32mm Schrader valve

- Size: 700c x 28 – 32 - ISO Diameter: 622 / road / 29" - ISO Width: 28mm, 29mm, 30mm, 31mm, 32mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 128g (32mm), 129g (48 & 60mm)

- Size: 29 x 2.1 – 2.3 - 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 622 / road / 29" , 630 / 27" - ISO Width: 54mm, 55mm, 56mm, 57mm, 58mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 681g

The name Airstop says it all. Michelin's Airstop tubes use a proprietary butyl rubber so your tires keep their pressure longer. And, the reinforced valve stem seam is ultra sturdy, too. - Weight: 128 grams (Schrader valve)

- Superlight tube - Removable valve core - 0.65mm wall thickness

- Size: 16 x 1-3/8 - ISO Diameter: 340 , 349 / 16" recumbent - ISO Width (mm): 35mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 84g

Our Standard Presta Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smoothly, ride after ride. - Individually cured for consistent tube thickness = the utmost in quality.

Minimum weight and maximum protection: Tubo-MTB-Plus tubes are optimized for tire widths from 2.5" to 3.0", today’s standard for E-MTBs. Their low weight of 105g (for 27.5+) increases your battery life, and they're also a lightweight alternative to tubeless setups. - 42mm valve length

- Size: 20 x 1-1/8 - ISO Diameter: 438 , 451/ 20 x 1-1/8", 20 x 1-1/8" - ISO Width: 25mm, 26mm, 27mm, 28mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 78g (32mm), 84g (60mm)

- ISO Diameter: 305 / 16" BMX - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 76g (1.25-1.5), 88g (1.5-1.75)

- Size: 24 x 1-1/8 - ISO Diameter: 520 / 24" mini bmx - ISO Width: 25mm, 26mm, 27mm, 28mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 80g (32mm), 82g (60mm)

- Low Lead Valve - 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 406 / 20" BMX - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 450g (1.5 – 1.75), 475g (1.75 – 2.125)

The premium latex inner tube for cyclists who require the best performances. Latex tubes are light, supple, and they generate low friction between the tire. All these characteristics work together to reduce rolling resistance. - Light and supple - Reduced rolling resistance - Removable valve core

Thicker than Panaracer's regular tubes, the Super Tube delivers excellent reliability. High-strength butyl provides enhanced puncture resistance, making it the only choice for downhill riding. - Threaded 36mm Presta valve

- ISO Diameter: 584 / 650b / 27.5" - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded

- Size: 700c x 28 – 32 - ISO Diameter: 622 / road / 29" - ISO Width: 28mm, 29mm, 30mm, 31mm, 32mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 102g (48mm), 104g (60mm)

- Size: 26 x 1.0 – 1.25 - ISO Diameter: 559 / 26" mtn - ISO Width: 25mm, 26mm, 27mm, 28mm, 29mm, 30mm, 31mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 96g

- Size: 26 x 1.5 – 1.75 - ISO Diameter: 559 / 26" mtn , 584 / 650b / 27.5" - ISO Width: 33mm, 34mm, 35mm, 36mm, 37mm, 38mm, 39mm, 40mm, 41mm, 42mm, 43mm, 44mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight 152g (32mm), 158g (48mm)

- Size: 26 x 1.9 – 2.125 - ISO Diameter: 559 / 26" mtn - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 170g (32mm), 171g (48mm)

- Size: 700c x 40 – 45 - ISO Diameter: 622 / road / 29" - ISO Width: 40mm, 41mm, 42mm, 43mm, 45mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 188g (32mm), 189g (48mm)

- Low Lead Valve - ISO Diameter: 203 / 12.5 - ISO Width (mm): 57mm - Labeled Size: 12 x 2-1/4 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth

- Low Lead Valve - ISO Diameter: 451/ 20 x 1-1/8", 20 x 1-1/8" - ISO Width (mm): 28mm, 29mm, 30mm, 31mm, 32mm, 33mm, 34mm - Labeled Size: 20 x 1-1/8 - 1-3/8 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 94g

- Designed to improve rotational stability by decreasing rotational mass at the valve body - Lightweight aluminum Presta-valve body - Removable valve core - Extenders are available and sold separately

The least expensive way to ditch 40+ grams of rotating weight is with our Turbo Talc Tubes. A patented, oversized 4.8cm valve base prevents tearing, while a partially threaded valve stem provides a clean interface with pumps. Our lightest and most supple tube offering, it's also been proven in rolling-resistance testing to reduce drag by as much as 13% per wheel. - Packed in talc for easier installation. - 4.8cm valve base prevents issues of valves tearing off. - Smooth at the top for easier pump head insertion and reduced wear on pump internals. - Thinner tube design saves approximately 40 grams of rotating weight. - Thickness: 0.6mm

At a featherweight 23g, the super-compact (when rolled up) S-Tubo-Road tubes stand out with very low rolling resistance which outpaces standard rubber tubes. With a 78% smaller packed size and the same puncture resistance as standard tubes, the S-Tubo-Road is the perfect choice as a spare and can be the crucial factor when you’re riding long and hard. - Ready for disc brakes (not suitable for rim brakes)

Michelin's Airstop name says it all. Their Airstop tubes use a proprietary butyl rubber that holds pressure longer so you won't have to top off your tires so much. These fine tubes are reinforced at the valve, too. - 98g - 40mm valve length

- Size: 700c x 35 – 43 - ISO Diameter: 622 / road / 29" - ISO Width: 35mm, 36mm, 37mm, 38mm, 39mm, 40mm, 41mm, 42mm, 43mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 122g (32mm), 124g (48mm), 126g (60mm)

- Size: 29 x 1.9 – 2.3 - ISO Diameter: 622 / road / 29" , 630 / 27" - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 176g (32mm), 178g (48mm)

- Low Lead Valve - ISO Diameter: 457 - ISO Width (mm): 44mm - Labeled Size: 22 x 1.75 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 145g

- Size: 700c x 28 – 32 - 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 622 / road / 29" , 630 / 27" - ISO Width: 28mm, 29mm, 30mm, 31mm, 32mm - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 400g

- Labeled Size: 12-1/2 x 1.75 – 2.125 - ISO Width: 47mm – 62mm - ISO Diameter: 203 / 12.5" - Shaft Type: Smooth - Flat Protection: Thorn Resistant - Valve: Standard Schrader - Valve Core: Removable - Tube Compound: Butyl

- ISO Diameter: 584 / 650b / 27.5" - ISO Width: 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm - Labeled Size: 27.5 x 52/58 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded

- High-quality, ultra-low weight tubes that retain air just as well as conventional butyl tubes - Possesses the same resistance to punctures

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube.

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube.

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. - 40mm valve length

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. - Weight: 140 grams - 40mm Presta valve

We all love to stop and smell the roses, but like they say, every rose has its thorn. And as we all know, there's no better way to ruin a beautiful ride than with a thorn in the tube. No need to worry, though, because Specialized designed their Thorn-Resistant Schrader Valve Tubes to combat pesky pricks of all shapes and sizes. Starting at the basis of the construction, Specialized designed the tube to be thicker at the outer side (the part against the tire) in order to stop pesky bits from puncturing all the way through the tube. Then, at the inner side (the part against the rim), it's actually thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings. - 40mm Presta valve

Super light at only 38g, the Tubo-ROAD-700c makes racing bikes even lighter. It's 70g lighter compared to a standard tube, a decisive success factor both over challenging long distances and when it comes to seconds. Suitable for disc and rim brake wheels.

- Designed for Gravel, Adventure and Endurance - The tube provides all the benefits of the innovative TPU (Thermoplastic Polyurethane) and thanksto a specific formulation delivers the best performances for those looking for superior puncture resistance with low weight and compact size - Unparalleled puncture protection - Compatible with disc and rim brakes

- Labeled Size: 24 x 1 - ISO Diameter: 540 / Wheelchair - ISO Width: 23mm, 24mm, 25mm - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta Short 32-40mm - Shaft Type: Threaded - Valve Core: Removable - Weight: 83g

The least expensive way to ditch 40+ grams of rotating weight is with our Turbo Talc Tubes. A patented, oversized 4.8cm valve base prevents tearing, while a partially threaded valve stem provides a clean interface with pumps. Our lightest and most supple tube offering, it's also been proven in rolling-resistance testing to reduce drag by as much as 13% per wheel. - Packed in talc for easier installation. - 4.8cm valve base prevents issues of valves tearing off. - Smooth at the top for easier pump head insertion and reduced wear on pump internals. - Thinner tube design saves approximately 40 grams of rotating weight. - Thickness: 0.6mm

- Polyurethane tube - Twice as strong as a regular butyl tube - Super lightweight - Very compact - Wheel Diameter: 29'' - Tube Width: 2.20-2.60 - Valve Length: 40mm - Valve: Presta - Tube Weight: 100g - Shaft Type: Threaded - Thorn resistant: No

- ISO Diameter: 622 / road / 29" - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Size: 29 x 1.9-2.3 - Tube Compound: Butyl - Valve: Long Schrader - Valve Core: Removable - Valve Shaft: Smooth

Odyssey's Air Supply tubes are specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price. On average, the Air Supply BMX tube retains air significantly longer than others currently available on the market. This is down to both the rubber that is used, and because of strict quality control during manufacturing. It is normal to assume that a “tube is a tube,” but a higher-quality tube will always last longer than a cheap tube during comparable everyday use.

- ISO Diameter: 622 / Road / 29" - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Shaft Type: Threaded - Valve Core: Removable

The name Airstop says it all. Michelin's Airstop tubes use a proprietary butyl rubber so your tires keep their pressure longer. And, the reinforced valve stem seam is ultra sturdy, too. - Weight: 136g

- Low Lead Valve - ISO Diameter: 340 , 349 / 16" recumbent - ISO Width (mm): 35mm - Labeled Size: 16 x 1-3/8 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight (g): 86g

Lighter tubes for faster wheels Improve the performance of your bike by reducing rotational weight with Bontrager Lightweight tubes. They feature a slimmer butyl wall to improve ride feel and reduce weight. - Product details - 0.6mm wall thickness - Equipped with removable valve cores - 100% inspected for guaranteed quality

- Low Lead Valve - ISO Diameter: 355 - ISO Width: 44mm , 45mm , 46mm , 47mm , 48mm , 49mm , 50mm , 51mm , 52mm , 53mm , 54mm - Labeled Size: 18 x 1.75-2.125 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 118g

- Size: 24 x 1-1/8 - ISO Diameter: 520 / 24" mini bmx - ISO Width (mm): 29mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 92g