The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding
The Belleville is Velo Orange's reproduction of what is probably the most popular style of French city and utility bike bar ever. Anyone who enjoys classic European films has seen bars like this dozens of times. The Belleville is 430mm wide (or 450mm outside-to outside) and has zero rise. That's fairly narrow for a city bar, which is an advantage in traffic. Reach is about 180mm; the straight grip section is a generous 150mm. It has a 25.4mm clamp area and is rendered in aluminum alloy. These bars are available in two tubing diameters, 23.8mm road-sized and 22.2mm mountain bike-sized (clamp area is 25.4mm on both): - 22.2mm diameter (MTB-size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar-end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size. - 23.8mm diameter (road-size) bars accept standard inverse brake levers, standard inverse shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters.
For all the off-road drop bar fans, Velo Orange offers the Far Bar, an affordable off-road drop bar. With off-road drop bars, most riders have the bars set up at the same height as they would have flat bars set to. Most of the time you are riding, your hands are on the hoods of the brake levers. Then, for steep descents, put your butt back behind the saddle and use the drops to get a better grip on the brake levers. You can run brifters or standard road brake levers on them and use bar end shifters as well. The Daija Cycleworks crest appears on each side of the 31.8 mm clamp area. These bars are a little different then road bars in terms of measuring the width. The listed width - 44cm or 48 cm - is measured center of the drops to centre of the hoods. The overall width is 585mm for the 44cm size, 625mm for the 48cm size. - Weight: 292g - Drop: 110mm - Drop Bend Style: Compact - Reach: 76mm - Material: Aluminum - Bar Top Style: Round
Remember those great Belleri Porteur bars from France? Of course Belleri is long out of business, but those handlebars are still sought-after. So, Velo-Orange decided to make their own Porteur bars. They are 480mm wide; reach is 140mm. The grip area is about 130mm, and they have about 15mm of rise or drop. The clamp area is 25.4mm. The quality and polishing are very nice. The transition from the grip to the curve on the originals was a bit abrupt; The Velo-Orange version has a gentler transition. The curves on both versions are fuller and, we think, prettier than the somewhat similar Champs Elysées bars used on the old Herse bikes. These bars are available in two tubing diameters, 23.8mm road-sized and 22.2mm mountain bike-sized (clamp area is 25.4mm on both): - 22.2mm diameter (MTB-size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar-end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size. - 23.8mm diameter (road-size) bars accept standard inverse brake levers, standard bar end shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters.
The Cheater Bar is built from triple butted 4130 CroMoly steel and is tough enough to handle all of the abuse you will inflict upon it on the trail. Surly made two versions: a clear coated raw steel version and a black ED coated version. Both are CroMoly steel. - Material: Cromoly steel - Clamp diameter: 31.8mm - Width: 780mm - Rise: 0mm - Sweep Angle: 11 degrees - Color: Clear Coat Silver and E.D. coated Black - Weight: 400g
If variety is the spice of life, then the Moloko bar oozes umami at every bend. It offers a multitude of hand positions to keep you comfortable and in control over the course of a long day riding over varied terrain. It also has plenty of spots to mount your various accessories. Dangle a handlebar bag from it, strap some lights to it, throw a GPS on it (if that's your thing), and ride all day. It comes in a standard width of 735mm but if 685mm is more your style, don't you worry. Surly added cut marks so you can easily make it so. - Material: CroMoly steel - Clamp diameter: 31.8mm - Width: 735mm; Cut marks for 685mm - Rise: 0 - Sweep Angle: 34 degrees - Weight: 709g - Color: E.D. coated Black
The Terminal Bar blends cruiser-style comfort with off-road touring performance. Able to run with a 40mm drop or rise, its swept-back design makes it great for long rides on rough, technical terrain. - 22.2mm diameter grip area; good to go for MTB shifters, brake levers, and grips - 34 degree backsweep with a 40mm + / - rise
Designed to combine what’s good about drop bars with the benefits of a riser, the Truck Stop Bar offers welcome relief to the road-weary traveler. Just like with a standard drop bar, you’ll have multiple hand positions at your disposal so you can stay comfortable and in control for the long haul down the Big Slab. And if it’s a more relaxed, upright riding position you’re after, 30mm of rise will get you there. So, if you’ve accidentally or intentionally cut your steer tube too short, here’s your chance at redemption. Also suitable for taller riders who’ve exhausted all other options for rise, it comes in three widths of 42, 45, and 48cm. Lightweight aluminum construction, CB radio not included. Specifications: - Material: Aluminum - Clamp Diameter: 31.8mm - Width: 42cm, 45cm, or 48cm - Rise: 30mm - Sweep Angle: 12 degrees - Color: E.D. coated black
$50.00 - $54.99
Specialized's Expert Alloy Shallow Bend Handlebar offers the same ergonomic benefits as the S-Works version, delivering a strong and affordable bar with no compromise. - Premium butted aluminum, high-strength design - Ergonomic top perch alleviates pressure on hands; smooth transitions for fit & comfort - Shallow bend drop design: 123mm drop x 75mm reach - UCI legal, compatible with Shimano, SRAM, and Campagnolo controls - Front of bar optimized for dual-cable routing
Developed in Specialized's very own Win Tunnel, the S-Works Aerofly Carbon Handlebars save ~17 seconds over a 40km distance versus a traditional shallow bend road bar. This time saving comes from the distinct aero shape, reduced tape on the tops, and full internal cable routing. And to accommodate a wider fit range, they also have a 25mm rise. - FACT carbon construction delivers a lightweight, stiff, and aerodynamic design. - Designed for internal brake and shifter cables—electronic compatible. - 25mm rise for additional rider fit range. - Bend: 130mm Drop x 80mm Reach
In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why Specialized designed the S-Works Hover Carbon Handlebars to excel on both fronts. Starting with the construction, they're made from their FACT carbon fiber for a light overall weight, vibration absorption, and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop and bend that's extremely comfortable, while they also offer a 15mm rise to help accommodate a wide fit range. - FACT carbon construction offers an optimized blend of durability and light overall weight. - 15mm rise for additional rider fit range. - Shallow Bend Drop: 123mm Drop x 75mm Reach
A high performance bar, ideal for smaller hands or for riders that spend the majority of their time climbing. An ergonomic top perch with smooth transitions alleviate pressure on hands and greatly improve comfort. - Bar Width (center-to-center): 36/38/40/42/44cm - Clamp Diameter: Oversized 31.8mm - Ergonomic top perch alleviates pressure on hands. - FACT carbon construction offers an optimized blend of durability and light weight. - Front of bar optimized for dual-cable routing. - Shallow Bend Drop: 123mm drop x 75mm reach - Shallow bend drop design. - UCI legal, compatible with Shimano, SRAM, and Campagnolo controls. - Weight: 200g (42cm)
- 6061 Premium butted Aluminum, high-strength design. - Short reach for optimal brake/shift control. - Shallow Bend Drop: 125mm drop x 65mm reach
- 12° moderately flared, medium width drop bar balances off-road performance, with on-road aerodynamics and comfort - Vibrocore foam core reduces transmission of harmful frequencies of vibration, and increases bar fatigue life and ultimate strength - Short 110mm drop and 65mm reach geometry is perfect for aggressive riding stance and long days in the saddle on mixed terrain - 31.8mm bar clamp zone, and aerodynamic ergo top section enhances hand comfort over longer rides, without limiting range of rider/hand positions - 21.6mm inner diameter barends, allow use of most barend shifters - KEY TECHNOLOGIES: Vibrocore, On-Off Road Geometry - MATERIAL: Zirconium Doped 7-Series Alloy - WIDTH HOOD TO HOOD (c-c): 420 / 440 / 460mm - WIDTH BAREND to BAREND (o-o): 498 / 518 / 538mm - WEIGHT: 355 / 360 / 365g - DROP / REACH: 10mm / 65mm (all sizes) - BAR CLAMP / TOP SECTION: 31.8mm Ergo Profile - FLARE: 12° - RAMP: 14°
The industry’s first all-in-one premium youth components upgrade kit, which is ergonomically optimized to enhance performance and ultimate control. - Includes Slater 90 pedals, Slater 650 bar, Slater Jr. grips, and a Fly Jr. saddle - Includes light plastic 22.2 to 19mm shims, located inside the packaging with the instruction manual - Age: Youth - Rail Material: Steel - Clamp Style: Standard Rails - Material: Synthetic - Length: 235mm - Width: 122mm - Weight: 270g
Race Face's Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs. These bars will last long after your bones, bruises and scrapes heal up and you’re ready to tackle that gap jump that has had your number. Features - Manufactured from cold drawn, seamless 6061 Alloy. - Butted for an optimal strength to weight ratio. - Wider construction & re-designed taper offers - 740mm wide - 9° rearward, 6° upward
- Intended for Cross Country and Trail use - 1/4 Risers have a 2deg upsweep; 3/4 Risers have a 4deg upsweep - Unidirectional carbon fiber with reinforced stem anti-crush zone - Bar Clamp Diameter: 31.8 mm - Bar Rise: 20 mm - Bend: 8 deg - Weight: 175 g - Width: 725 mm
The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio
Race Face set an industry benchmark with the its Sixc product group - light and strong carbon DH rated crank and bar. Building on the unprecedented success of their proprietary Carbon Technology program, SIXC rewrites the rules in the 6-8 inch travel bike world. SIXC (the C is silent, eh!) represents the culmination of years of Race Face engineering in both carbon and all mountain products. Race Face has created a bar for the aggressive rider who demands the ultimate in performance. Strong enough for DH, yet light enough to not hold you back on the pedal up to that new trail you have been hearing so much about, SIXC blows up the limits of carbon performance. - SIXC bars are manufactured with a leading edge composite material which allows us to reach our high strength requirements at an impressively low weight - Minimum bar width of 28" or 710mm at indicated cut marks - Reinforced clamping zones for lock-on grip - Daily destructive testing from each production run ensures each bar meets the exacting standards set by our engineers
Race Face's flagship carbon DH rated handlebar just got wider. With the push to 820mm the new Sixc 35 handlebar gives unprecedented control at high speed, just what you need for UCI DH races, high speed park laps, or that next challenging AM adventure. Featuring Race Face's tried and true sweep design to get you in the attack position on the bike and uses their UD carbon wrap that gives the Sixc 35 strength you can believe in at a mind numbing 235g. Save weight and gain control? You just lost an excuse… - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - Gold Standard of DH is now wider and stronger - 820mm width for maximum control
Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you. - Manufactured from cold drawn, 7075 Aluminium - 35 optimized triple butted design - Turned up to Rally control with 800mm width - Rise sizes to for every build and preference 10/20/35mm - Stealth black on black decals to match every frame color
The Aeria Evo maintains the aerodynamics of the original version but increases the ability for the rider to get into their best possible position. The expanded fit range and tilt capability make it a class leader for adjustment and position optimisation. Specifications - The Aeria Evo is an update of our well proven Aeria bar. We have evolved the fit range of the bar with new brackets, armrests and extensions. - The new brackets add the ability to tilt the entire assembly, as well as letting the armrests - go much narrower than the first generation design. - A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The new Ergo armrests increase rider comfort with a smoothly curved shape and expand the fit range with an expansive set of adjustment options. - The extension rotation can be easily adjusted using the shaft bolt. There is a 40mm range of extension length adjustment once the extensions have been cut. - The bracket can be tilted by up to 10 degrees. - There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1700 possible configurations of Reach, Stack and Pad Width. Adding in the tilt factor magnifies this adjustment range even further. - All hardware and component pieces were not only designed for performance and ease of use but also strength. - Basebar Width: 42cm (Center-to-Center) - Basebar: Carbon - Pursuit Reach: 157.5mm (center to tip) - Bracket: Aeria Evo (6061-T6 aluminum) - Armrest: Ergo - Armrest Stack: 56mm to 80mm (5mm Increments) - Armrest Offset: -66mm to 1.5mm (7.5mm Increments) - Armrest Width: 100mm to 266mm (18.5mm Increments) - Extension Length Adjustment: 40mm - Extension Length: 340mm - Extension Height: 80mm - Extension Angle: 35° - Extension Material: 6061-T6 aluminum, pre-drilled for bar-end shifter cable - Armrest Rotation: 7° - Bracket Tilt Adjustment: 0-10° - Weight: 809g
The Airwing has a deep drop to keep you in a wind-cheating aero tuck, making this a perfect base bar for triathlons and time trials. Made from double-butted 6061 aluminum, the Airwing is super light and boasts a wide clamping section that will accept any Profile Design clip-on aero bar. Plus, it's shot peened and anodized for added strength and durability and pre-drilled for internal cable routing for aerodynamics and a clean look.
Profile Design's DRiVe handlebars use the latest in ergonometric design to offer progressively sized handlebars built around a cyclist's most powerful hand positions. A long-radius transition to the hood position distributes pressure evenly across a rider's palm and provides clearance for their arm when they're sprinting in the drops. Short reach and flat transitions perfectly suit modern frame geometries and create a comfortable cruising position on top of the handlebars. The gradual, dual-radius drop eliminates sharp angles and ensures that riders can reach the brake and shift levers while they're in the drops.
Profile's Stoker 26 Base Bar features a 26.0mm diameter the entire length across the bar, allowing the widest aero bar clamping area that Profile makes. This makes the bar ideal if you have a wide aero position or need a comfy stoker bar for your tandem. Made from double-butted 6061 aluminum, the Stoker 26 is light, not to mention shot peened and anodized for added strength and durability. Plus, it's pre-drilled for internal cable routing for aerodynamics and a clean look.
Reversible basebar wing improves fit for bicycles with smaller headtubes. Two-Way Fit System: Standard fit provides a low drop for aggressively positioned athletes who favor or fit needs dictate a low out-of-the-aerobars position which translate to fast, aggressive riding style. Flip the bar for an elevated position ideal for riders requiring higher stack in their cockpit position and higher relative pursuits. - Straight Brake Extensions: Straight, ergonomic brake extensions help maintain control while remaining aerodynamic. - Clean Cable Routing Pre-slotted internal cable routing on both sides for a clean profile. Di2 Compatible. - Weight: 220g (42cm) - Width: 40cm (center to center) - Center Clamp Diameter: 31.8mm - Clamp Width: 100, 120, 140mm - (44mm) - Clip Compatible: Yes - Material: Multi-Direction, Multi-layer Carbon Fiber - Pursuit Reach: 160mm (center to tip) - Pursuit Drop: ±20mm - Pursuit OD/ID: 25.4 / 19.5mm - Drop Outsweep: No
The WING/10a offers great fit versatility - allowing the rider to fine-tune the grip height for their riding style and comfort preferences. The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. For optimal aero performance, the bar should be set in the low position to increase the separation from the armrests. Aero The Wing/10a employs a truncated airfoil (Kamm Tail) to stay within UCI regulations while offering the performance of a much deeper section. This, along with tidying up the underside of the wing where the cables used to exit has led to a small improvement in performance. For optimal aero performance the bar should be set in the low position to increase the separation from the armrests. Fit Data - The WING/10a is available in the following widths: 36, 38, 40, 42, 44 - The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. The grip length can also be trimmed by up to 30mm. - The WING/10a offers the greatest fit versatility of any alloy basebar we’ve previously made, allowing the rider to fine tune for their riding style and comfort preferences. - An additional reason for the truncated design of the wing was to improve hand comfort when sitting up on the bar tops
Parlee's carbon handlebar is one of the most comfortable bars you'll find. The handlebar’s top has a rearward sweep and oval profile for a natural hand position and all-day comfort. The 35mm clamping area creates a solid union with the stem and fork. The ergonomic bend has a short 70mm extension and shallow 128mm drop that complements modern shift/brake lever combinations. This makes the ideal perch for the rider’s hands regardless of build kit. The drops have an extended return creating fuller hand positions for greater comfort. There are also trim lines on the bar termination at 5mm increments for a customized fit. Compatible with all modern rim and disc levers. - Weight: 220g - Bar Drop: 128mm - Drop Bend Style: Compact - Bar Reach: 70mm - Material: Carbon - Bar Top Style: Round
The 10-4 Bar is the biggest bar Odyssey makes. It uses large radius bends, thicker walled, butted tubing, and a traditional 7/8-inch crossbar for superior strength and durability. These bars have a post-weld heat-treating which is guaranteed against manufacturer’s defects. Features: - 1.8/1.3mm thick, multi-butted main tubing - Butted, traditional 7/8? crossbar for strength - Large radius bends for greater durability - Post-weld heat-treated Specs: - 10-inch rise - 30-inch width - 11-deg backsweep - 4-deg upsweep
- Road/Touring/Cross bar with a unique slight backward sweep on the tops - Flat area behind the lever position prevents hands from sliding forward - 4 degree flared drops (width does not include the flares). No grooves - 335-345g: all Nitto bars are measured center to center - 140mm drop - 96mm reach