Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

Selle Royal Scientia Moderate
$69.99
Selle Royal, along with researchers from the Sport University of Cologne, the largest sports university in Europe, have applied theory, data and methods to bicycle saddle research in an attempt to unmask the fundamental design characteristics essential to optimizing well-being and overall cycling performance. The result is SCIENTIA, a full spectrum of 9 ergonomic saddles scientifically engineered to precisely and comprehensively fit each rider. With its outstanding design based on a scientific research, this saddle guarantees the ultimate level of comfort that perfectly fits the moderate rider. Padded with the 3D skingel, specifically positioned in the Central Reservoir for the soft tissues, it avoids shocks due to the innovative Curva Suspension. Sizing - M > 1 (Small) fits riders with less than 11cm of ischial variation - M > 2 (Medium) fits riders with 11-13cm of ischial variation - M > 3 (Large) fits riders with more than 13cm of ischial variation Dimensions/Weight - M > 1 (Small): 289mm long x 141mm wide / 425g - M > 2 (Medium): 289mm long x 161mm wide / 455g - M > 3 (Large): 289mm long x 178mm wide / 465g
SRAM MRX Comp Twist Shifter Set
$19.00 - $21.00
SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. Shifting one gear or the whole range is simple with just a twist of the wrist. They shift a 2:1 Shimano rear derailleur and a SRAM or Shimano derailleur up front.
Shimano Ultegra 10-Speed Cassette
$74.99
Shimano's Ultegra 10-Speed Cassette delivers pro-level shifting and durability. The computer-enhanced tooth shapes and tough cogs mean you can shift quickly, precisely and smoothly even under pressure.
Crank Brothers Eggbeater 1
$59.99
Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 1s feature chromoly axles, stainless-steel springs, and steel bodies.
Shimano Altus M361-L Crankset
$51.99
Shimano Acera FC-M361 cranksets feature sturdy construction, reliable shifting, and replaceable chainrings. - Spindle Interface type: Square Taper JIS
Problem Solvers Locking Headset Spacer
$11.99
The Problem Solvers Locking Headset Spacer is handy during headset servicing for keeping the fork in place when the top cap and stem are removed. It's also great for keeping the fork in the frame when you're shipping your bike in a box, which usually requires removing the stem and bars. This quality piece is for 1 1/8-inch forks and is CNC machined of light, durable 6061 aluminum and has a stainless-steel bolt.
SRAM MRX Comp Rear Twist Shifter
$9.00 - $16.99
SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. They shift a 2:1 Shimano rear derailleur.
Shimano Altus M311-L Crankset
$49.99
Shimano Altus M311 cranksets provide durability and reliable shifting for triple chainring drivetrains. - Hyperdrive SG-X chainrings - 7/8-speed compatible - Spindle interface type: Square Taper JIS
KMC 415H Chain
$13.00
Heavy duty 3/16" single speed chain great for hardcore street rippers who need the strongest chain possible. - Extra-wide, for non-derailleur bikes: BMX, cruisers and tricycles - Compatible with 1/8" x 1/2" single speed set-ups but oversized for extra strength and durabilityLinks (links): 98 - Width: 13.1 mm - Drivetrain Speeds: Single Speed 1/2" x 3/16" - Chain Connection Type: Reusable Master Link - Half Link Chain: No - Weight: 800g
Problem Solvers Bar End Plugs
$12.99
Pretty much everyone has lost the plugs from drop bar bikes. It's obnoxious. These plugs, however, have two elastomers that expand when tightened, keeping them secure within the bar. - Fit bars with 18-20mm inner diameters - Installs with a 3mm hex wrench - Outer diameter of plug measures: 25mm
Delta Stem Raiser
$36.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap
Problem Solvers Cassette Spacer
$4.99
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.
Surly Hurdy Gurdy
$35.00
Hurdy Gurdy is another nifty device that keeps a rear wheel from slipping forward in the dropout under pedal load. It's designed for the Cross-Check's semi-horizontal front-loading dropouts, and will also work on many other similar dropouts. Hurdy Gurdy is investment cast of stainless steel for durability and good looks, and shares many of Tuggnut's design features. Its two axle holes allow for a wide variety of fore/aft wheel positions, it will work with standard QRs, bolted axles, and nutted axles up to 10mm.
Problem Solvers Cross Hanger
$14.99
The Problem Solvers Cross Hanger is the perfect front brake cable hanger for your cyclocross bike with cantilever brakes. Designed for easy installation and maximum braking power, this light, durable aluminum piece is a small but crucial part of your cantilever setup.
Specialized SIP Locking Grips
$24.99
Specialized's SIP Locking Grips have the grip you need when you're throwing down on the trail. Featuring a super-tacky, durable material and strategically placed, moto-inspired waffle pattern, these lock-on grips deliver optimum comfort and maximum control. Available in two sizes for a perfect fit, the SIPs also are also easy to color coordinate with your rig.
Bontrager Supertack Visibility Handlebar Tape
$29.99
Your hands aren't going anywhere Your grip is the last thing you should be thinking about while turning the pedals. Keep riding through all weather conditions in confidence with the no-slip grip Supertack Handlebar tape. Shock-absorbing foam adds an extra layer of awesome. Key features - Super-tacky texture for no-slip grip - Ideal stretch for quick and easy installation - Shock-absorbing foam for added comfort - Finishing strips and reflective Bontrager bar end plugs included - Adhesive backing Details - Material: Microfiber
Odyssey MPEGs Steel Pegs
$14.99
- 4140 Chromoly - 3 Possible peg positions for longer peg life - 14mm with 3/8-inch adapters included - 4 inches (length) x 1-3/8 inches (outer diameter) - Sold in pairs - 8.75 oz (17.5 oz for a pair)
Bontrager Speed Concept Seatpost Cap
$49.99
Bontrager's Speed Concept Seatpost Cap lets you get your position dialed for your next triathlon or time trial. Two different saddle offsets and widely a adjustable saddle angle means you'll find the perfect fit for your race against the clock.
Avid FR-5 Single Brake Lever
$11.00
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone
SRAM PC-1091R 10-Speed Hollow Pin Chain
$69.99
SRAM’s premier 10-speed chain features hollow pins and cut-out outer plates for accurate shifting in all conditions, light weight, strength and smoothness. Plus, it's compatible with all industry-standard 10-speed systems. And, with its great PowerLock connecting link, installation and removal is a snap.
Bontrager Gel Grip
Bontrager's Gel Grip gives you a confident, comfortable hold on your handlebars. There's a layer of gel within the tape that cuts down on vibrations and road chatter for serious long-ride comfort. The no-slip polyurethane feels good with or without gloves, and it's durable and easy to clean. And, you get a set of Bontrager reflective bar-end plugs and finishing strips as well.
Specialized S-Wrap Cork Handlebar Tape
$19.99
When you look at the start line of a race that's bound for rough roads, you're sure to see bar upon bar wrapped in cork tape. Why? Because it's tough to beat the vibration absorbing properties of this natural material. With the Specialized S-Wrap Cork Handlebar Tape, however, we managed to do one better. It features a dual-density design that pairs cork with EVA foam tape, and the result of this is an incredible reduction in hand fatigue. They also gave it an elastomer gel backing to heighten the aforementioned, as well as overall comfort. And for easy installation, they kept everything highly stretchable and low in profile. - Low-profile cork/EVA foam tape is sleek and comforting over rough roads. - Elastomer gel backing provides additional comfort and vibration damping. - Easy-stretch tape with feathered edges creates a smoot, low profile wrap. - Bar end plugs included.
absoluteBLACK Oval Direct Mount Chainring for SRAM 3-Bolt 6mm Offset
$74.99
absoluteBLACK Oval Direct Mount 1x Chainrings for SRAM greatly improve traction and climbing abilities. They are designed for SRAM cranks that have a 3-bolt direct mount interface and removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 6mm offset is designed for 135/142 spacing on standard DUB/GXP/Long-Spindle BB30, as well as 170/177 spacing on fat bike cranks
Bontrager XR Trail Elite MTB Grip Set
$24.99
A durable lock-on grip with a unique finned texture for added comfort and control on the trail. Get a grip on sustainability The XR Trail Elite mountain bike grip has a finned texture that forms to your hand to keep you comfortable on all-day riding sessions. A higher density material surrounds the end of the grip for added durability and the lightweight CoreLock clamp holds the grip securely in place for confidence on even the most technical trails. You and your hands will both feel good knowing that the grip's core is made from recycled ocean-bound plastics. Product details - Finned texture pattern conforms to your hand for supportive grip - Rubber compound and tread design are optimized for control and comfort - Grip core made with recycled ocean-bound plastic - Single-clamp design maximizes grip surface for secure, predictable performance - Alloy core-lock clamp eliminates slipping by securing grip core to bar - Higher-density end cap resists scraping for added durability - 3mm M4 bolt increases hold and resists stripping - 31mm diameter
Deda Elementi Velocita CrMo Track Bar
$103.29
- High-polished, chrome-plated CrMo construction - Purebred classic track bar in either 31.8mm or 26.0mm bar-clamp diameter - Deep drop and reach profile for true sprinting performance - 654g @ 42cm(26.0mm): drop/reach are measured center-to-center
Surly 10/12 Adapter Washer for Solid Axle
$15.00
Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.
Specialized Bennies Platform Pedals
$79.99
With loads of traction, sure-footedness, and premium control, Specialized's Bennies Platform Pedals are ready for everything from freeride madness to trail riding. They're made of a rugged, yet lightweight concave aluminum body with 24 replaceable pins for maximum grip. Durable chromoly axles and sealed cartridge bearings mean they're built to last. - 430 grams (pair) - Width x Length: 100 x 105mm - Thickness: 17.30mm in the center/19mm at each end
KMC MissingLink Connector
$6.99
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
ODI Rogue Lock MTB Grips
$29.95
- Aluminum clamps secure the grip on both ends using a hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters, use 90mm replacement grip options for twist shifters)
Magura HS33 R Hydraulic Rim Brake
$168.00
The HS33 R is the newest hydraulic safety rim brake in radial design in a portfolio of test-winning products. With its high braking power, reduced weight and perfect ergonomics, it makes an ideal partner for both road and off-road – and is equally suited for traditional, city and eBikes. Well worth a demo! - The improved legendary HS33 rim brake features a redesigned master cylinder and 2 finger lever blade - Full hydraulic rim brake system: closed design (no reservoir) - Mounts to cantilever/linear brake post studs (fork and/or frame) - Streamlined alloy brake lever assembly with integrated (TPA) Turbo Pad Wear Adjuster and integrated reach adjust - All hose fittings perfectly hidden with new designed caps - Compatible with all trigger and twist grip shifters - Full-hydraulic Magura mineral oil system with a 5-year leakproof warranty - Includes: flip/flop front or rear lever, 1350mm pre-bled (cut-to-fit) tubing, stud-mounted slave cylinders with mounting hardware, MC/lever, and manual (brake boosters included)